Osmo Wood Wax Finish Clear Extra Thin, Clear Satin 1101 for sale in Miami, FL
Osmo Wood Wax Finish is wood finish which combines all the advantages of oils and waxes in 1 unique product. Resistant to water and dirt, very durable and smooths wood surfaces. Easy application - no need for a primer or sanding between coats, which saves time and money. Resistant against liquid spillages and the dry finish is safe for humans, plants and animals. Transparent (1-coat): Apply a thin coat with a lint-free cloth. Work product thinly and evenly onto wood using cloth For a more solid color, ensure product is applied evenly, then proceed to step five For a subtle effect: allow roughly 15-minutes for oils to penetrate and then proceed to step four Working with the grain, remove all excess product from surface with a clean lint-free cloth Allow 8-10 hours drying time. Allow for good ventilation whilst drying. For flooring, a top coat of Polyx®-Oil is required for added durability against wear and stains Intensive (2-coats): Apply 2 thin coats with a lint-free cloth. Once 1st coat has dried (8-10 hours) apply a 2nd thin coat for a solid color Allow 8-10 hours drying time. Allow for good ventilation whilst drying. 2 coats is not recommended for high-wear surfaces like flooring BY HAND WITH A FLOOR BRUSH Apply 2 thin coats with an Osmo Floor Brush or Osmo Natural Bristle Brush for smaller areas. Apply with the brush thinly along the wood grain on the clean and dry wood surface For a subtle glazing effect, apply thinly with a cloth, and within twenty minutes wipe away excess Allow 8-10 hours drying time before recoating. Allow for good ventilation whilst drying. Apply 2nd coat following the previous steps Clean brush with Osmo Brush Cleaner and Thinner (benzene-free) or Turpentine WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container BY HAND WITH A FLOOR ROLLER Apply 2 thin coats with an Osmo Microfibre Floor Roller. Stir the Wood Wax Finish well and pour into tray Take the Microfibre Roller and roll well on the grid of the tray Roll very thinly and evenly onto the wood following the grain Allow 8-10 hours drying time before recoating. Allow for good ventilation whilst drying. For flooring, a top coat of Polyx®-Oil is required for added durability against wear and stains Clean roller with Osmo Brush Cleaner and Thinner (benzene-free) or Turpentine Tip: The microfiber roller should only be saturated lightly. A lightly saturated roller will allow the user to cover approx 43-53 ft2 (4-5m2) of flooring. Please be aware that Osmo Wood Wax Finish has a high yield (see product label). Product excesses and roller tracks must be roller or smoothed out immediately. MECHANICALLY WITH A FLOOR BUFFER Apply 1 thin coat with an Osmo FloorxCenter or floor-buffing machine. Stir the Wood Wax Finish well prior to use. Trowel the product thinly onto the floor using an Osmo Double Sided Scraper or similar. Disperse and polish the floor using a floor buffer and white pads. There is too much material on the surface when you can see rings. Turn the pad over. Allow 8-10 hours drying time. Allow for good ventilation whilst drying In order to protect the pigments, 1-coat of clear Osmo Polyx®-Oil is necessary as a top coat
|
|
 |